Learning how to access the router admin page is essential especially if you need to configure advanced settings. Some traditional options that may be completed on the site will be to set up an invisible security for the home network, forward ports on your game system and video camera, and set up your Linksys router manually. If you want to check your router ping status or wireless signal strength then ping 192.168.1.1 -t command is very useful.
There are certainly a variety of reasons you might need to login to a wireless router. Most likely the two most typical are firmware revisions and simple wireless network changes. Whatever the reason, the procedure is easy and quick. This article courses you through 4 foolproof ways to login to any router. Learn these methods, and you’ll be effectively on the way to being a Google executive.
Ping 192.168.1.1 -t Commands of Wireless Router
First off, this entire training will make more sense if you determine what an IP address is since that’s a key element of this method. The simplest way to describe an IP address is to think of it just like the address of your home. Every system in your community has its IP address, just like each residence in your block has a unique address. One of many causes your property comes with an address will be to enable postmen to deliver mail to the right house. As we recognize the IP (a string of figures, often you start with “192.168” and closing in “.1.1” or “.0.1”), we can enter that value into a web browser and login for the switch.
How to login 192.168.1.1 IP address?
- Click here http://192.168.1.1
(If you have changed your router IP address then enter new IP address here)
- To reach the user interface of the router, type http://192.168.1.1 –t into your browser panel address.
- In order to get the access to your modem username or password, check the ping 192.168.1.1 -t
Whether you want to check the connection between the router and the computer or check your Internet connection, Windows has a handy utility called Command prompt, which enables the user to perform different tasks using various commands. Although this goes beyond the skills of the average user, it is always good to know how to do the first two things with the help of the so-called ping command. The next few paragraphs will explain the ping command and how to do it properly.
How to ping your router?
To ping your router first, you have to know its default IP address. Finding the routers IP and the ping command are executed via the Command prompt, so the procedure is as follows.
First, you have to open up the Command Prompt. In Windows 7, you have to type CMD in the Search box in the Start menu, and press Enter on the keyboard.
When the Command Prompt opens, to find what is the default IP of your router, you have to type the following command ipconfig. Look for the part which says Default Gateway. This is your router IP address. In most cases, it starts with 192.168. For example, if you own a Linksys router this number should be 192.168.1.1.
The next step is to ping the router. While the Command Prompt is still open type the following command:
Ping 192.168.1.1 -t
Some sources suggest pinging the router without the -t switch at the end. Let’s see what is the difference between these two.
Pinging with or without -t
If you are in doubt whether to use the -t switch or not, read the following and decide.
When you ping the routers IP address without the -t switch at the end (ping 192.168.1.1), the ping command will send 4 packets of data to the router, and you will receive 4 responses. In most cases, this is enough to show whether the problem is between the router and the PC.
On the other hand, when we add the -t switch at the end of the ping command (ping 192.168.1.1 -t), the number of packets sent to the router is indefinite, which means the packets will be sent until the user interrupts this command. This command is interrupted in two ways:
Ctrl + C this will stop the pinging completely
Ctrl + Break or Ctrl + Pause this will stop the pinging for a few seconds, give the summary up to that point and then continue
Analyzing the results of the ping command can be somewhat tricky. However, ideally, you should receive the same number of sent packets and have 0% of lost packets. This means that everything is OK.
Using the “ping 192.168.1.1 -t” alternatively called Continuous or Extended Ping command is there to help you check for potential internet connectivity or router problems. As you can see, you can do this in a few seconds, and you may get the idea about what is going on at that moment. Therefore, give it a try. You have nothing to lose!